The 4 Amp power supply can operate up to 24 iFEED units.
Please note: This is a US model operating on 110V.
Schedule up to 28 feeding times over a 24-hour period.
Insert AAA battery (included) in the digital timer. Please replace battery every 12 months or as needed. The digital timer holds the memory of the programming only when the battery is inserted.
The red light indicates that the power supply is operational.
The green light indicates that power is sent to the feeder.
Programming the digital timer.
Important: When programming -- a START and a STOP time must be set.
Lock/Unlock display: Press Cancel/Resume 4 times. Display will auto lock after a few minutes.
Auto/Manual: ON - AUTO - OFF. Leave in AUTO for scheduled feeding times.
If needing to test the system outside a scheduled feeding time, press manual until ON is displayed.
Important: Remember to set back to AUTO after testing.
Setting Day and Time: Press CLOCK. Set the current hour, minute, and day of the week.
Press Set Up: Press HOUR. Display will show ‘1 ON’.
The top bar will show WEEK MO TU WE TH FR SA SU.
Set the first feeding time: hour and then minutes.
Press SET UP again. Display will show ‘1 OFF’. Now set the stop time.
Leave 15 minutes between ON and OFF times.
Example: ‘1 ON’ 05:00 -- ‘1 OFF’ 05:15.
Press SET UP. Display shows ‘2 ON’. Set feeding start time.
Press SET UP. Display shows ‘2 OFF’. Set feeding stop time.
Example: ‘2 ON’ 08:00 -- ‘2 OFF’ 08:15.
Repeat steps until all desired feeding times (up to 28) have been programmed.
When done, press CLOCK. Display will auto lock after a few minutes.
* iFEED has a 30-day money back guarantee. (Not incl. shipping).
Product must be undamaged, and in its original packaging for a full refund.
iFEED unit:
Length: 21”
Width: 10”
Depth: 7”
Capacity: 12 pounds
Funnels:
Long: 10.5” L x 2.25” W
Short: 8.5” L x 3” W
Power supply:
Length: 9”
Width: 7”
Depth: 4.5”
Troughs
Straight back trough: 15.5” wide x 13” deep (front to back) x 17” tall.
Slant back trough: 15.5” wide x 13” deep (front to back) + additional 6” for slant x 15.5” tall (incl. slant)
iFEED Automatic Horse Feeder Installation and Wiring Instructions(English)
iFEED Automatic Horse Feeder Installation and Wiring Instructions(Spanish)
iFEED Automatic Horse Feeder User's Guide(English)
iFEED Automatic Horse Feeder User's Guide(Spanish)
iFEED Automatic Horse Feeder Stainless Steel Bracket Installation
iFEED Automatic Horse Feeder Multi Feeder Diagram
Attaching the funnel